How to Deep Clean Your Bathroom: Step by Step Guide for Beginners
A sparkling clean bathroom doesn’t happen by accident but it doesn’t have to be hard either. Whether you’re tackling a deep clean bathroom project for the first time or building a new routine, this guide walks you through every step. You’ve got this!
What You’ll Need
| π§Ή Supplies All purpose bathroom cleaner Toilet bowl cleaner Glass/mirror cleanerScrub brush & toilet brush | π§€ Safety Rubber or latex glovesMicrofiber cloths (3β4)Old toothbrush for groutMop or floor scrubber |
Step 1: Declutter and Prep the Space
Before you clean bathroom surfaces, clear everything off counters, shelves, and the shower floor. Remove rugs, empty the trash can, and take out any dΓ©cor items. This gives you full access to every surface and makes the whole process faster.
π‘ Pro Tip: Put on your rubber gloves now. You’ll want them on for the entire cleaning session.
Step 2: Apply Cleaner to the Toilet First
Squirt toilet bowl cleaner under the rim of the toilet bowl and let it sit while you work on other areas. This soak time does the heavy lifting so you don’t have to scrub as hard later.
Next, spray the outside of the toilet the tank, lid, seat (top and bottom), and base with all purpose bathroom cleaner. Let it sit for 2β3 minutes.
Step 3: Tackle the Shower and Tub
Spray your shower walls, tub, and fixtures generously with bathroom cleaner. For a deep clean bathroom session, pay special attention to:
- Grout lines between tiles (use your old toothbrush)
- Soap scum on glass doors or curtain liner
- The showerhead (soak in a bag of white vinegar if clogged)
- Caulk lines around the tub edge
Let the cleaner sit for 5 minutes, then scrub with your brush and rinse thoroughly with warm water.
Step 4: Clean the Sink and Countertop
Spray the sink basin, faucet handles, and countertop. Use a microfiber cloth or scrub brush to clean the sink bowl, making sure to get around the drain and the base of the faucet these spots collect gunk fast.
π‘ Pro Tip: A toothbrush works great for getting around the base of faucet handles where buildup hides.
Step 5: Wipe Down Surfaces and Mirrors
Now go back and wipe all the sprayed surfaces with a clean microfiber cloth. Then spray your mirror with glass cleaner and wipe in a circular or S-pattern motion to avoid streaks.
Don’t forget: light switch plates, door handles, towel bars, and the outside of cabinets all need a quick wipe down too.
Step 6: Scrub and Flush the Toilet
By now your toilet bowl cleaner has been sitting for several minutes. Scrub under the rim and around the bowl with your toilet brush. Flush to rinse. Then wipe down all exterior surfaces you sprayed in Step 2 with a fresh cloth.
Important: Use a separate cloth for the toilet never the same one you used on the sink or counter.
Step 7: Mop the Floor
Sweep or vacuum the bathroom floor first to pick up dust and hair. Then mop with a bathroom safe floor cleaner, working from the back corner toward the door so you don’t step on your clean floor.
Pay extra attention to the area around the base of the toilet it’s often the dirtiest spot in the whole bathroom.
Step 8: Replace Items and Finish Up
Once the floor is dry, put back your rugs, replace toiletries, hang fresh towels, and drop a new trash bag in the can. Take a breath your bathroom is officially deep cleaned!
Frequently Asked Questions
How often should I deep clean my bathroom?
Deep clean your bathroom once a month. Do a light clean bathroom wipe-down weekly to maintain freshness between sessions.
What is the best cleaner for a deep clean bathroom?
An all purpose bathroom spray works for most surfaces. Use dedicated toilet bowl cleaner and a glass cleaner for streak-free mirrors.
How long does it take to deep clean a bathroom?
A thorough deep clean bathroom typically takes 30β45 minutes for beginners. With practice, you can do it in 20 minutes.